Zero One Technology Co. Ltd. WP03002 Manuel D’Utilisation

 

 

72

 

If you had problems to setup your print server  in your wireless network, please refer to the 

following steps: 

1.  Change the print server to diagnostic mode by switching the DIP switch to DIAG 

mode(the side near to power connector.) 
 

2.  Change your wireless adapter to 802.11b Ad-hoc mode, and the ESSID is WLAN-PS 

 

3. Run PSAdmin to discover the print server. 

 

4.  Select the wireless print server 

 

 

 

5. Select wireless and input the ESSID, Channel, Rates that meet your network 

enviromnet, then press ok.