Wacom DTF-720 Manuel D’Utilisation

From the WACOM TABLET Control Panel, select the CALIBRATION tab.

  If you are working with multiple monitors, select the Monitor that 

corresponds to the tablet's LCD display. (Only monitors that are set to one of 
the resolutions supported by the DTF-720 will appear in the list.)

Click on the CALIBTRATE... button to display the monitor calibration screen.

Cross-hairs

Adjustment pattern 

for phase and pitch.  

See 

Adjusting Pitch 

and Phase (VGA 

Only) on page 26 for 

details.

You will need to calibrate the pen display tablet in order to align the screen cursor 
position with the position of the pen on the display screen. This is required to 
adjust for parallax caused by the display screen cover glass. Set the DTF-720 in 
its working position, then follow the procedure below.