Wacom DTF-720 Manuel D’Utilisation

  When attaching DTF-720 onto 

an alternate mounting platform, 

be sure to follow all instructions 

in the documentation supplied 

by the platform manufacturer.   

If improperly installed, the unit 

could fall and be damaged.

unscrew

Turn off your computer 

and   power off DTF-720.  
Then disconnect all cables 
from DTF-720.

Protect the display screen sur-

face by spreading a soft cloth 
onto a flat table and placing 
DTF-720 face down on the 
cloth.

 Remove the four screws 

and lift the adjustable stand 
assembly away from the body 
of DTF-720.

Using the appropriate screws 

for your mounting platform, 
firmly attach DTF-720 to the 
alternate mounting platform.

Rettach the cabling.

If you will be using DTF-720 in an installation that requires the use of an alternate 
mounting platform, you can remove the adjustable stand from DTF-720 and mount the 
pen display onto a VESA conforming mount arm or stand.   
A VESA mounting platform will require mount screws that are 4 mm wide with a 0.7 
mm pitch (M4 Regular), and a maximum screw clearance depth of 15 mm.  Exceeding 
the screw clearance depth of 15 mm will damage DTF-720 internal components.
To remove the adjustable stand and attach DTF-720 to a different mounting platform: