Wacom DTF-720 Manuel D’Utilisation
8
Tablet Driver Installation
Before you install the tablet software of DTF-720, you need to connect the USB cable
of DTF-720 to your computer. After connecting it, you turn on DTF-720 and your computer.
Windows:
1.
First turn on the DTF-720. Then turn your computer on and login, allowing the
operating system to fully load. The DTF-720 will automatically register as a
USB device.
USB device.
Windows 98SE: The ADD NEW HARDWARE WIZARD will display.
Follow the prompts, selecting the default options. If prompted to install
drivers for the USB Human Interface Device, insert the Windows
98SE CD, click OK, and enter the location of the Windows CAB
files (e.g., D:\WIN98). Note that the files may be located on your hard disk in
the C:\WINDOWS\OPTIONS\CABS folder.
drivers for the USB Human Interface Device, insert the Windows
98SE CD, click OK, and enter the location of the Windows CAB
files (e.g., D:\WIN98). Note that the files may be located on your hard disk in
the C:\WINDOWS\OPTIONS\CABS folder.
2.
Insert the DTF-720 tablet driver CD into the CD-ROM drive. The
DTF-720 menu should automatically display. If the menu does not
display, double-click on the INSTALL icon (located on the CD).
Click on the INSTALL PEN TABLET button and follow the prompts
to install the driver software.
display, double-click on the INSTALL icon (located on the CD).
Click on the INSTALL PEN TABLET button and follow the prompts
to install the driver software.
Macintosh:
1.
First turn on the DTF-720. Then turn on your computer and allow the operating
system to fully load. The DTF-720 will automatically register as a USB device.
Disable any virus protection programs and close all open applications before
installing the software.
Disable any virus protection programs and close all open applications before
installing the software.
2.
Insert the DTF-720 tablet driver CD into your computerʼs CD-ROM drive.
Double-click on the INSTALL icon located on the CD. Click on the INSTALL
PEN TABLET button and follow the prompts to install the driver software.
PEN TABLET button and follow the prompts to install the driver software.
3.
After the software installation has been completed, make sure you can use
your pen on the DTF-720 display to move the screen cursor.
Be sure to check the Read Me file for late-breaking news. If you have trouble
installing the DTF-720, see the Troubleshooting section beginning on page 27 of
this manual.
installing the DTF-720, see the Troubleshooting section beginning on page 27 of
this manual.
Next Steps:
Be sure to adjust the tablet calibration to precisely align the screen cursor position with the
location of the pen tip. Refer to
location of the pen tip. Refer to
Calibrating the DTF-720 on page 14. To learn more about
Using the DTF-720, proceed to
Customizing The DTF-720 - The Basics and to Using
The Pen.