Wacom DTU-1031 Manuel D’Utilisation
8
8
CAUTION
Do not disassemble
the pen.
This may cause the device to malfunction. In this case,
Wacom shall have no responsibility to repair or replace
the pen.
Do not strike hard objects with the pen, such as repeatedly tapping the pen against a desk
surface. Doing so may cause damage to the pen.
surface. Doing so may cause damage to the pen.
Do not apply excessive pressure or stress to the pen tip,
cap,
or side switch.
This may
cause failure or malfunction.
Only use a replacement pen tip (nib) specified for the pen by Wacom.
Do not scratch the display screen. Avoid placing sharp objects on the display screen surface.
Avoid shock
or vibration to
the product, the display stand, and the pen.
Hitting or dropping
the
product
may damage the display screen or other components.
Do not put heavy objects on the
product
or push against it with a strong force; this may
damage the display screen or break
the display stand mechanism
.
Do not place heavy articles on
the cabling of the product
, repeatedly bend the cables
sharply, or apply heavy stress to the cable connectors; this may damage the
product
or
cabling.
Do not store the
product
on a surface that would excessively bend or crimp the cable.
If your
product
has a coated surface, a worn pen nib that is sharp or angular may cause
damage. Replace the pen tip if necessary.
Do not use any organic solvent (e.g. alcohol) or even mild detergent to clean the display
screen. Use of these cleaners can damage the display screen. Damage of this kind is not
covered by the manufacturer's warranty.
screen. Use of these cleaners can damage the display screen. Damage of this kind is not
covered by the manufacturer's warranty.
•
Before cleaning, always disconnect the
product
from the AC power source.
•
To clean the display screen, use an anti-static cloth or a slightly damp cloth. When
cleaning, apply only a light amount of pressure to the display screen and do not make
the surface wet.
cleaning, apply only a light amount of pressure to the display screen and do not make
the surface wet.
•
To clean the pen display casing, the display stand, or the pen, use a soft cloth slightly
dampened with water.
dampened with water.
Touching the same part of your body to the
product
(LCD panels and other areas) for
extended periods of time may cause low temperature burns. Avoid touching the
product
with the same part of your body for extended periods of time.