ZyXEL Communications Corporation AG120 Manuel D’Utilisation

Page de 97
ZyXEL AG-120 User’s Guide
Chapter 4 ZyXEL Utility Configuration
45
The following table describes the labels in this screen. 
4.2.1.3  WPA-RADIUS/WPA2-RADIUS
Figure 22   Security Setting: WPA-RADIUS/WPA2-RADIUS
The following table describes the labels in this screen. 
Table 6   Security Setting: WPA-PSK/WPA2-PSK
LABEL
DESCRIPTION
Encryption Type
The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are 
the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses 
a simple common password, instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to 
 for more information.
Pre-Shared Key
Type a pre-shared key (same as the AP or peer device) of between 8 and 63 case-
sensitive ASCII characters (including spaces and symbols) or 64 hexadecimal 
characters.
Back
Click Back to go to the Site Survey screen to select and connect to another 
network.
Next
Click Next to confirm your selections and advance to the Confirm New Settings 
screen. Refer to 
Exit
Click Exit to return to the Site Survey screen without saving.
Table 7   Security Setting: WPA-RADIUS/WPA2-RADIUS
LABEL
DESCRIPTION
Encryption Type
The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are 
the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses 
a simple common password, instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to 
 for more information.
Authentication 
Type
The type of authentication you use depends on the RADIUS server or AP.
Select an authentication method from the drop down list. Options are TLS and 
PEAP.
Login Name
Enter a user name. 
This is the user name that you or an administrator set up on a RADIUS server.