ZyXEL Communications Corporation AG220 Manuel D’Utilisation

ZyXEL AG-220 User’s Guide

Chapter 4 Wireless Station Mode Configuration

47

When you configure the AG-220 to connect to a network with wireless security activated and 
the security settings are disabled on the AG-220, the screen varies according to the encryption 
method used by the selected network.

Figure 25   Station Mode: Security Setting: WEP  

The following table describes the labels in this screen.  

MAC address 

This field displays the MAC address of the wireless device.

Surveyed at 

This field displays the time when the wireless device was scanned.

Table 5   Station Mode: Site Survey  (continued)

Table 6   Station Mode: Security Setting: WEP 

Security Settings

WEP

Select 64 Bits, 128 Bits or 256 Bits to activate WEP encryption and then fill in the 

related fields.

Encryption Type

Select an authentication method. Choices are SHARED and OPEN.
Refer to 

 for more information.

Pass Phrase

Enter a passphrase of up to 63 case-sensitive printable characters. As you enter 

the passphrase, the AG-220 automatically generates four different WEP keys and 

displays it in the key field below. Refer to 

 for more 

information.
At the time of writing, you cannot use the passphrase function to generate 256-bit 

WEP keys.

Transmit Key

Select a default WEP key to use for data encryption. The key displays in the field 

below.