ZyXEL Communications Corporation AG320 Manuel D’Utilisation

ZyXEL AG-320 User’s Guide

Chapter 4 ZyXEL Utility Configuration

45

The following table describes the labels in this screen. 

Configure IEEE 802.1x security with various authentication methods in this screen. 

Table 7   Security Setting: WPA/WPA2

Encryption Type

The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are 

the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses 

a simple common password, instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to 

 for more information.

Authentication 

Type

The type of authentication you use depends on the RADIUS server or AP.
Select an authentication method from the drop down list. Options are TLS and 

PEAP.

Login Name

Enter a user name. 
This is the user name that you or an administrator set up on a RADIUS server.

Password

This field is not available when you select TLS in the Authentication Type field. 
Enter the password associated with the user name above. 

Certificate

This field is only available when you select TLS in the Authentication Type field. 
Select a certificate used by the authentication server to authenticate the AG-320.

Note: You must first have a wired connection to a network and 

obtain the certificate(s) from a certificate authority (CA). 
Consult your network administrator for more information.

Validate Server 

Certificate

Select the check box to check the certificate of the authentication server.

PEAP Inner EAP

This field is only available when you select PEAP in the Authentication Type 

field.
The PEAP method used by the RADIUS server or AP for client authentication is 

MS CHAP v2.

Back

Click Back to go to the Site Survey screen to select and connect to another 

network.

Next

Click Next to confirm your selections and advance to the Confirm New Settings 

screen. Refer to 

. 

Exit

Click Exit to return to the Site Survey screen without saving.