ZyXEL Communications Corporation AMG1302 Manuel D’Utilisation

Chapter 11 Filters

AMG1302-T10A User’s Guide

Use this screen to create and apply IP/MAC filters. Click Security > Filter > IP/MAC Filter. The 

screen appears as shown.

 > Filter > IP/MAC Filter

The following table describes the labels in this screen. 

Access Management > Filter (IP/MAC)

IP/MAC Filter Rule Editing
IP/MAC Filter Set Index

Select the index number of the filter rule.

Active

Use this field to enable or disable the rule.

Interface

Select the PVC to which to apply the filter.

Direction

Apply the filter to Both, Incoming or Outgoing traffic direction.

Rule Type

Select IP or MAC type to configure the rule.

Use the IP Filter to block traffic by IP addresses.

Use the MAC Filter to block traffic by MAC address.

Source IP Address

Enter the source IP address of the packets you wish to filter. This field is 

ignored if it is 0.0.0.0.

Subnet Mask

Enter the IP subnet mask for the source IP address

Port Number

Enter the source port of the packets that you wish to filter. The range of this 

field is 0 to 65535. This field is ignored if it is 0.

Destination IP Address

Enter the destination IP address of the packets you wish to filter. This field is 

ignored if it is 0.0.0.0.