ZyXEL Communications Corporation AMG1302 Manuel D’Utilisation
Chapter 12 Static Route
AMG1302-T10A User’s Guide
161
12.2.1 Static Route Edit
Use this screen to configure the required information for a static route. Select a static route index
number and click Edit. The screen shown next appears.
Figure 90
Advanced > Static Route: Edit
The following table describes the labels in this screen.
Table 60
Advanced > Static Route: Edit
LABEL
DESCRIPTION
Static Route Setup
Destination IP
Destination IP
Address
This parameter specifies the IP network address of the final destination. Routing is always
based on network number. If you need to specify a route to a single host, use a subnet
mask of 255.255.255.255 in the subnet mask field to force the network number to be
identical to the host ID.
IP Subnet Mask
Enter the IP subnet mask here.
Gateway IP
Address
Enter the IP address of the gateway. The gateway is a router or switch on the same
network segment as the device's LAN or WAN port. The gateway helps forward packets to
their destinations.
Back
Click this to return to the previous screen without saving.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.