ZyXEL Communications Corporation AMG1302 Manuel D’Utilisation
Chapter 1 Introduction
AMG1302-T10A User’s Guide
17
You can configure your wireless network in either the built-in Web Configurator, or using the WPS
button.
Figure 2
Wireless Access Example
1.5.1 Using the WPS/WLAN Button
Use the WPS/WLAN button on the Device to activate and deactivate wireless. To turn it on, simply
press the WPS/WLAN button for 1 second. Once the WPS/WLAN LED turns green, the wireless
network is active.
You can also use the WPS/WLAN button to quickly set up a secure wireless connection between
the Device and a WPS-compatible client by adding one device at a time.
To activate WPS:
1
Make sure the POWER LED is on and blinking.
2
Press the WPS/WLAN button for five to ten seconds and release it.
3
Press the WPS button on another WPS-enabled device within range of the Device. The WPS/WLAN
LED should flash while the Device sets up a WPS connection with the other wireless device.
4
Once the connection is successfully made, the WPS/WLAN LED shines green.