ZyXEL Communications Corporation AMG1302 Manuel D’Utilisation
Chapter 18 Universal Plug-and-Play (UPnP)
AMG1302-T10A User’s Guide
188
When a UPnP device joins a network, it announces its presence with a multicast message. For
security reasons, the Device allows multicast messages on the LAN only.
All UPnP-enabled devices may communicate freely with each other without additional configuration.
Disable UPnP if this is not your intention.
UPnP and ZyXEL
ZyXEL has achieved UPnP certification from the Universal Plug and Play Forum UPnP™
Implementers Corp. (UIC). ZyXEL's UPnP implementation supports Internet Gateway Device (IGD)
1.0.
See the following sections for examples of installing and using UPnP.
18.2 The UPnP Screen
Use the following screen to configure the UPnP settings on your Device. Click Advanced > UPnP to
display the screen shown next.
See
Figure 108
Advanced > UPnP > General
The following table describes the fields in this screen.
Table 75
Advanced > UPnP > General
LABEL
DESCRIPTION
Active the Universal Plug and
Play (UPnP) Feature
Select this check box to activate UPnP. Be aware that anyone could use a
UPnP application to open the web configurator's login screen without
entering the Device's IP address (although you must still enter the password
to access the web configurator).
Allow users to make
configuration changes through
UPnP
Select this check box to allow UPnP-enabled applications to automatically
configure the Device so that they can communicate through the Device, for
example by using NAT traversal, UPnP applications automatically reserve a
NAT forwarding port in order to communicate with another UPnP enabled
device; this eliminates the need to manually configure port forwarding for
the UPnP enabled application.