ZyXEL Communications Corporation AMG1302 Manuel D’Utilisation

 Chapter 21 Logs

AMG1302-T10A User’s Guide

This section provides descriptions of example log messages. 

System Maintenance Logs

Time calibration is successful

The router has adjusted its time based on information from the 

time server.

Time calibration failed

The router failed to get information from the time server.

WAN interface gets IP: %s

A WAN interface got a new IP address from the DHCP, PPPoE, or 

dial-up server.

DHCP client IP expired

A DHCP client's IP address has expired.

DHCP server assigns %s

The DHCP server assigned an IP address to a client.

Successful WEB login

Someone has logged on to the router's web configurator 

interface.

WEB login failed

Someone has failed to log on to the router's web configurator 

interface.

Successful TELNET login

Someone has logged on to the router via telnet.

TELNET login failed

Someone has failed to log on to the router via telnet.

Successful FTP login

Someone has logged on to the router via ftp.

FTP login failed

Someone has failed to log on to the router via ftp.

NAT Session Table is Full!

The maximum number of NAT session table entries has been 

exceeded and the table is full.

Starting Connectivity Monitor

Starting Connectivity Monitor.

Time initialized by Daytime 

Server

The router got the time and date from the Daytime server.

Time initialized by Time server

The router got the time and date from the time server.

Time initialized by NTP server

The router got the time and date from the NTP server.

Connect to Daytime server fail

The router was not able to connect to the Daytime server.

Connect to Time server fail

The router was not able to connect to the Time server.

Connect to NTP server fail

The router was not able to connect to the NTP server.

Too large ICMP packet has been 

dropped

The router dropped an ICMP packet that was too large.

Configuration Change: PC = 

0x%x, Task ID = 0x%x

The router is saving configuration changes.

Successful SSH login

Someone has logged on to the router’s SSH server.

SSH login failed

Someone has failed to log on to the router’s SSH server.

Successful HTTPS login

Someone has logged on to the router's web configurator interface 

using HTTPS protocol.

HTTPS login failed

Someone has failed to log on to the router's web configurator 

interface using HTTPS protocol.