ZyXEL Communications Corporation AMG1302 Manuel D’Utilisation

 Chapter 7 LAN Setup

AMG1302-T10A User’s Guide

When you use IP alias, you can also configure firewall rules to control access between the LAN's 

logical networks (subnets).

Note: Make sure that the subnets of the logical networks do overlap.

The following figure shows a LAN divided into subnets A, B, and C.

Physical Network & Partitioned Logical Networks

Use this screen to change your Device’s IP alias settings. Click Network > LAN > IP Alias to open 

the following screen.

Network > LAN > IP Alias

The following table describes the labels in this screen. 

Ethernet
Interface

A: 192.168.1.1 - 192.168.1.24

B: 192.168.2.1 - 192.168.2.24

C: 192.168.3.1 - 192.168.3.24

Network > LAN > IP Alias 

IP Alias 

Select the check box to configure another LAN network for the Device.

IP Address

Enter the IP address of your Device in dotted decimal notation. 

Alternatively, click the right mouse button to copy and/or paste the IP address.

IP Subnet Mask

Your Device will automatically calculate the subnet mask based on the IP address that 

you assign. Unless you are implementing subnetting, use the subnet mask computed by 

the Device.

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.