ZyXEL Communications Corporation AMG1302T10B Manuel D’Utilisation
AMG1302/AMG1202-TSeries User’s Guide
217
C
H A P T E R
2 3
Firmware Upgrade
23.1 Overview
This chapter explains how to upload new firmware to your AMG1302/AMG1202-TSeries. You can
download new firmware releases from your nearest ZyXEL FTP site (or www.zyxel.com) to use to
upgrade your device’s performance.
download new firmware releases from your nearest ZyXEL FTP site (or www.zyxel.com) to use to
upgrade your device’s performance.
Only use firmware for your device’s specific model. Refer to the label on
the bottom of your AMG1302/AMG1202-TSeries.
the bottom of your AMG1302/AMG1202-TSeries.
23.2 The Firmware Screen
Click Maintenance > Firmware Upgrade to open the following screen. The upload process uses
HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the
system will reboot.
HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the
system will reboot.
Do NOT turn off the AMG1302/AMG1202-TSeries while firmware upload
is in progress!
is in progress!
Figure 109
Maintenance > Firmware Upgrade
The following table describes the labels in this screen.
After you see the firmware updating screen, wait two minutes before logging into the AMG1302/
AMG1202-TSeries again.
AMG1202-TSeries again.
Table 83
Maintenance > Firmware Upgrade
LABEL
DESCRIPTION
Current Firmware
Version
Version
This is the present Firmware version.
File Path
Type in the location of the file you want to upload in this field or click Browse... to find it.
Browse...
Click this to find the .bin file you want to upload. Remember that you must decompress
compressed (.zip) files before you can upload them.
compressed (.zip) files before you can upload them.
Upload
Click this to begin the upload process. This process may take up to two minutes.