ZyXEL Communications Corporation B220 Manuel D’Utilisation
ZyAIR Wireless LAN Utility
Wireless LAN Security
4-3
Table 4-1 ZyAIR Utility: WEP Encryption
FIELD DESCRIPTION
Default Key Select one of the network keys to be the key used for data encryption.
Network Key 1 … 4 Enter the WEP keys in the fields provided.
If you select 64 Bit in the Key Type field.
Enter either ten hexadecimal digits in the range of “A-F”, “a-f” and “0-9”
(e.g. 11AA22BB33) for HEX key type
(e.g. 11AA22BB33) for HEX key type
or
Enter five 7-bit printable ASCII characters (case sensitive) ranging from
“a-z”, “A-Z” and “0-9” (e.g. MyKey) for ASCII key type.
“a-z”, “A-Z” and “0-9” (e.g. MyKey) for ASCII key type.
If you select 128 Bit in the Key Type field,
Enter either 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-9”
(for example, 00112233445566778899AABBCC) for HEX key type
(for example, 00112233445566778899AABBCC) for HEX key type
or
Enter 13 7-bit printable ASCII characters (case sensitive) ranging from
“a-z”, “A-Z” and “0-9” (for example, MyKey12345678) for ASCII key type.
“a-z”, “A-Z” and “0-9” (for example, MyKey12345678) for ASCII key type.
You must configure all four WEP keys the first time you use
the ZyAIR.
Restore Default
Click Restore Default to reset all fields back to factory default values.
Undo Changes
Click Undo Changes to start configuring the fields again.
Apply Changes
Click Apply Changes to save the changes back to ZyAIR.