ZyXEL Communications Corporation EMG2881-T20A Manuel D’Utilisation
Chapter 11 Maintenance
EMG2881-T20A User’s Guide
99
The following table describes the labels in this screen.
11.4 Password Screen
It is strongly recommended that you change your EMG2881-T20A's password.
If you forget your EMG2881-T20A's password (or IP address), you will need to reset the device. See
for details.
Click Maintenance > Password. The screen appears as shown.
Figure 60
Maintenance > Password
The following table describes the labels in this screen.
Table 42 Maintenance > General
LABEL
DESCRIPTION
System Name
System Name is a unique name to identify the EMG2881-T20A in an Ethernet network.
Domain Name
Enter the domain name you want to give to the EMG2881-T20A.
Administrator
Inactivity Timer
Inactivity Timer
Type how many minutes a management session can be left idle before the session times out. The
default is 5 minutes. After it times out you have to log in with your password again. Very long idle
timeouts may have security risks. A value of "0" means a management session never times out,
no matter how long it has been left idle (not recommended).
default is 5 minutes. After it times out you have to log in with your password again. Very long idle
timeouts may have security risks. A value of "0" means a management session never times out,
no matter how long it has been left idle (not recommended).
Apply
Click Apply to save your changes back to the EMG2881-T20A.
Cancel
Click Cancel to exit this screen without saving.
Table 43
Maintenance > Password
LABEL
DESCRIPTION
User
This field displays the name of the admin account.
Old Password
Type the default password or the existing password you use to access the system in this
field.
field.
New Password
Type your new system password (up to 30 characters). Note that as you type a password,
the screen displays an asterisk (*) for each character you type.
the screen displays an asterisk (*) for each character you type.
Retype to Confirm
Type the new password again in this field.
Apply
Click Apply to save your changes back to the EMG2881-T20A.
Cancel
Click Cancel to begin configuring this screen afresh.