ZyXEL Communications Corporation EMG2926Q10A Manuel D’Utilisation

 Chapter 24 USB Media Sharing

EMG2926-Q10A User’s Guide

The following table describes the labels in this screen.

You can use Windows Explorer or FTP to access the USB storage devices connected to the 
EMG2926-Q10A.

This example shows you how to use Microsoft’s Windows XP to browse your shared files. Refer to 
your operating system’s documentation for how to browse your file structure. 

You should have enabled file sharing and create a user account (Bob/1234 for example) with read 
and write access to USB 1 in the USB Media Sharing > SAMBA screen.

Open Windows Explorer to access the connected USB device using either Windows Explorer browser 
or by browsing to your workgroup.

Management > USB Media Sharing > FTP

Enable FTP

Select this to enable the FTP server on the EMG2926-Q10A for file sharing using FTP.

Port

You may change the server port number for FTP if needed, however you must use the 
same port number in order to use that service for file sharing.

User Accounts

Before you can share files you need a user account. Configure the following fields to set 
up a file-sharing account. 

#

This is the index number of the user account.

Enable

This field displays whether a user account is activated or not. Select the check box to 
enable the account. Clear the check box to disable the account.

User Name

Enter a user name that will be allowed to access the shared files. You can enter up to 20 
characters. Only letters and numbers allowed.

Password

Enter the password used to access the shared files. You can enter up to 20 characters. 
Only letters and numbers are allowed. The password is case sensitive.

USB1/2

Specify the user’s access rights to the USB storage device which is connected to the 
EMG2926-Q10A’s USB port.

Read & Write - The user has read and write rights, meaning that the user can create 
and edit the files on the connected USB device.

Read - The user has read rights only and can not create or edit the files on the 
connected USB device.

None - The user cannot access the files on the USB device(s) connected to the USB 
port.

Upstream 
Bandwidth

Enter the maximum bandwidth (in Kbps) allowed for incoming FTP traffic.

Downstream 
Bandwidth

Enter the maximum bandwidth (in Kbps) allowed for outgoing FTP traffic.

Apply

Click Apply to save your changes back to the EMG2926-Q10A.

Cancel

Click Cancel to begin configuring this screen afresh.