ZyXEL Communications Corporation EMG2926Q10A Manuel D’Utilisation
EMG2926-Q10A User’s Guide
177
C
H A P T E R
2 5
Port Configuration
25.1
Overview
The EMG2926-Q10A has 1000Base-T auto-negotiating Ethernet ports. In 10/100/1000 Mbps
Gigabit Ethernet, the speed can be 10 Mbps, 100 Mbps or 1000 Mbps. The duplex mode can be both
half or full duplex. An auto-negotiating port can detect and adjust to the optimum Ethernet speed
(10/100/1000 Mbps) and duplex mode (full duplex or half duplex) of the connected device.
Gigabit Ethernet, the speed can be 10 Mbps, 100 Mbps or 1000 Mbps. The duplex mode can be both
half or full duplex. An auto-negotiating port can detect and adjust to the optimum Ethernet speed
(10/100/1000 Mbps) and duplex mode (full duplex or half duplex) of the connected device.
25.2
Port Configuration Screen
Use this screen to configure the EMG2926-Q10A port speed and duplex settings. Click
Configuration > Management > Port Configuration.
Configuration > Management > Port Configuration.
Figure 125
Management > Port Configuration
The following table describes the labels in this screen.
Table 73
Management > Port Configuration
LABEL
DESCRIPTION
WAN/LAN1~4
This field displays the Ethernet port of the EMG2926-Q10A.
Speed
Select the speed of the Ethernet connection on this port. The choices are Auto, 1000,
100 and 10.
100 and 10.
Selecting Auto (auto-negotiation) allows one port to negotiate with a peer port
automatically to obtain the connection speed that both ends support. If the peer port
does not support auto-negotiation or turns off this feature, the EMG2926-Q10A
determines the connection speed by detecting the signal on the cable and using half
duplex mode.
automatically to obtain the connection speed that both ends support. If the peer port
does not support auto-negotiation or turns off this feature, the EMG2926-Q10A
determines the connection speed by detecting the signal on the cable and using half
duplex mode.