ZyXEL Communications Corporation EMG2926Q10A Manuel D’Utilisation
Chapter 26 Maintenance
EMG2926-Q10A User’s Guide
187
Figure 134
Maintenance > Language
26.10 System Operation Mode Overview
The Sys OP Mode (System Operation Mode) function lets you configure your EMG2926-Q10A as a
router or access point. You can choose between Router Mode, and Access Point Mode depending
on your network topology and the features you require from your device.
router or access point. You can choose between Router Mode, and Access Point Mode depending
on your network topology and the features you require from your device.
The following describes the device modes available in your EMG2926-Q10A.
Router
A router connects your local network with another network, such as the Internet. The router has
two IP addresses, the LAN IP address and the WAN IP address.
two IP addresses, the LAN IP address and the WAN IP address.
Figure 135
LAN and WAN IP Addresses in Router Mode
Access Point
An access point enabled all ethernet ports to be bridged together and be in the same subnet. To
connect to the Internet, another device, such as a router, is required.
connect to the Internet, another device, such as a router, is required.