ZyXEL Communications Corporation EMG2926Q10A Manuel D’Utilisation
Chapter 2 Connection Wizard
EMG2926-Q10A User’s Guide
25
Figure 13
Wireless Security: No Security
The following table describes the labels in this screen.
2.5.2 Wireless Security: WPA2-PSK
Choose WPA2-PSK security in the Wireless Security screen to set up a password for your wireless
network.
network.
Table 6
Wireless Security: No Security
LABEL
DESCRIPTION
Wireless Radio
Choose whether you want to apply the wireless security to 2.4G Hz or 5G Hz wireless
radio.
radio.
Wireless
Network Name
(SSID)
Network Name
(SSID)
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN.
If you change this field on the EMG2926-Q10A, make sure all wireless stations use the same
SSID in order to access the network.
SSID in order to access the network.
Security Mode
Select a security level from the drop-down list box.
Choose No Security to have no wireless LAN security configured. If you do not enable any
wireless security on your EMG2926-Q10A, your network is accessible to any wireless
networking device that is within range.
wireless security on your EMG2926-Q10A, your network is accessible to any wireless
networking device that is within range.
Exit
Click this to close the wizard screen without saving.
Back
Click this to return to the previous screen.
Next
Click this to continue.