ZyXEL Communications Corporation EMG2926Q10A Manuel D’Utilisation
Chapter 10 WAN
EMG2926-Q10A User’s Guide
84
10.5 Advanced WAN Screen
To change your EMG2926-Q10A’s advanced WAN settings, click Network > WAN > Advanced.
The screen appears as shown.
The screen appears as shown.
First DNS Server
Second DNS
Server
Server
Third DNS Server
Select Obtained From ISP if your ISP dynamically assigns DNS server information (and
the EMG2926-Q10A's WAN IP address). The field to the right displays the (read-only)
DNS server IP address that the ISP assigns.
the EMG2926-Q10A's WAN IP address). The field to the right displays the (read-only)
DNS server IP address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the DNS server's
IP address in the field to the right.
IP address in the field to the right.
If you chose User-Defined, but leave the IP address
set to 0.0.0.0, User-Defined changes to None after you click Apply. If you set a second
choice to User-Defined, and enter the same IP address, the second User-Defined
changes to None after you click Apply.
choice to User-Defined, and enter the same IP address, the second User-Defined
changes to None after you click Apply.
Select None if you do not want to configure DNS servers. If you do not configure a DNS
server, you must know the IP address of a computer in order to access it.
server, you must know the IP address of a computer in order to access it.
IPv6 DNS server
This is not available when you select IPv4 Only in the IPv6/IPv4 field.
Obtain IPv6 DNS
info Automatically
info Automatically
Select this to have the EMG2926-Q10A get the IPv6 DNS server addresses from the ISP
automatically.
automatically.
Use the following
Static DNS IPv6
Address
Static DNS IPv6
Address
Select this to have the EMG2926-Q10A use the IPv6 DNS server addresses you configure
manually.
manually.
IPv6 DNS Server
Enter the IPv6 DNS server address assigned by the ISP.
WAN MAC Address
The MAC address section allows users to configure the WAN port's MAC address by using
the EMG2926-Q10A’s MAC address, copying the MAC address from a computer on your
LAN or manually entering a MAC address.
the EMG2926-Q10A’s MAC address, copying the MAC address from a computer on your
LAN or manually entering a MAC address.
Factory default
Select Factory default to use the factory assigned default MAC Address.
Clone the
computer’s MAC
address - IP
Address
computer’s MAC
address - IP
Address
Select Clone the computer's MAC address - IP Address and enter the IP address of
the computer on the LAN whose MAC you are cloning.
the computer on the LAN whose MAC you are cloning.
Set WAN MAC
Address
Address
Select this option and enter the MAC address you want to use.
Apply
Click Apply to save your changes back to the EMG2926-Q10A.
Cancel
Click Cancel to begin configuring this screen afresh.
Table 28
Network > WAN > Internet Connection: PPPoE Encapsulation (continued)
LABEL
DESCRIPTION