ZyXEL Communications Corporation EMG3415-B10A Manuel D’Utilisation
Chapter 32 Backup/Restore
EMG3415-B10A User’s Guide
206
Restore Configuration
Restore Configuration allows you to upload a new or previously saved configuration file from your
computer to your EMG.
computer to your EMG.
Do not turn off the EMG while configuration file upload is in progress.
After the EMG configuration has been restored successfully, the login screen appears. Login again to
restart the EMG.
restart the EMG.
The EMG automatically restarts in this time causing a temporary network disconnect. In some operating
systems, you may see the following icon on your desktop.
systems, you may see the following icon on your desktop.
Figure 136 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your computer
to be in the same subnet as that of the default device IP address (192.168.200.1).
to be in the same subnet as that of the default device IP address (192.168.200.1).
If the upload was not successful, the following screen will appear. Click OK to go back to the
Configuration screen.
Configuration screen.
Figure 137 Configuration Upload Error
Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and return the EMG to its
factory defaults. The following warning screen appears.
factory defaults. The following warning screen appears.
Table 109 Restore Configuration
LABEL
DESCRIPTION
File Path
Type in the location of the file you want to upload in this field or click Choose File to find it.
Choose File
Click this to find the file you want to upload. Remember that you must decompress compressed
(.ZIP) files before you can upload them.
(.ZIP) files before you can upload them.
Upload
Click this to begin the upload process.