ZyXEL Communications Corporation EMG6765-Q10A Manuel D’Utilisation

Chapter 23 USB Media Sharing

EMG6765-Q10A User’s Guide

Use this screen to set up file sharing via the EMG6765-Q10A using FTP and create user accounts. Click 
Management > USB Media Sharing > FTP.

Figure 100   Management > USB Media Sharing > FTP 

The following table describes the labels in this screen.

User Accounts

Before you can share files you need a user account. Configure the following fields to set up 
a file-sharing account. 

#

This is the index number of the user account.

Enable

This field displays whether a user account is activated or not. Select the check box to 
enable the account. Clear the check box to disable the account.

User Name

Enter a user name that will be allowed to access the shared files. You can enter up to 20 
characters. Only letters and numbers allowed.

Password

Enter the password used to access the shared files. You can enter up to 20 characters. Only 
letters and numbers are allowed. The password is case sensitive.

USB1/2

Select the USB port(s) of the EMG6765-Q10A. The configured user can access the files on the 
USB device(s) connected to the selected USB port(s) only.

Apply

Click Apply to save your changes back to the EMG6765-Q10A.

Cancel

Click Cancel to begin configuring this screen afresh.

Table 71   Management > USB Media Sharing > SAMBA (continued)

Table 72   Management > USB Media Sharing > FTP

FTP Setup

Enable FTP

Select this to enable the FTP server on the EMG6765-Q10A for file sharing using FTP.

Port

You may change the server port number for FTP if needed, however you must use the same 
port number in order to use that service for file sharing.