ZyXEL Communications Corporation EMG6765-Q10A Manuel D’Utilisation

Chapter 25 Maintenance

EMG6765-Q10A User’s Guide

Figure 106   Maintenance > Firmware Upgrade 

The following table describes the labels in this screen.

After you see the Firmware Upload In Process screen, wait two minutes before logging into the 
EMG6765-Q10A again.

The EMG6765-Q10A automatically restarts in this time causing a temporary network disconnect. In some 
operating systems, you may see the following icon on your desktop.

Figure 107   Network Temporarily Disconnected

After two minutes, log in again and check your new firmware version in the Status screen.

If the upload was not successful, an error message appears. 

Backup configuration allows you to back up (save) the EMG6765-Q10A’s current configuration to a file 
on your computer. Once your EMG6765-Q10A is configured and functioning properly, it is highly 
recommended that you back up your configuration file before making configuration changes. The 
backup configuration file will be useful in case you need to return to your previous settings. 

Restore configuration allows you to upload a new or previously saved configuration file from your 
computer to your EMG6765-Q10A.

Table 78   Maintenance > Firmware Upgrade

Firmware Upgrade

File Path 

Type in the location of the file you want to upload in this field or click to find it.

Click to find the .bin file you want to upload. Remember that you must decompress compressed 
(.zip) files before you can upload them. 

Upload 

Click Upload to begin the upload process. This process may take up to two minutes.