ZyXEL Communications Corporation EMG6765-Q10A Manuel D’Utilisation
Chapter 9 Wireless LAN
EMG6765-Q10A User’s Guide
82
You can configure up to four SSIDs to enable multiple BSSs (Basic Service Sets) on the EMG6765-Q10A.
This allows you to use one access point to provide several BSSs simultaneously. You can then assign
varying security types to different SSIDs. Wireless clients can use different SSIDs to associate with the
same access point.
This allows you to use one access point to provide several BSSs simultaneously. You can then assign
varying security types to different SSIDs. Wireless clients can use different SSIDs to associate with the
same access point.
Click Network > Wireless LAN 2.4G/5G > More AP. The following screen displays.
Figure 37 Network > Wireless LAN 2.4G/5G > More AP
The following table describes the labels in this screen.
9.4.1 More AP Edit
Use this screen to edit an SSID profile. Click the Edit icon next to an SSID in the More AP screen. The
following screen displays.
following screen displays.
Table 22 Network > Wireless LAN 2.4G/5G > More AP
LABEL
DESCRIPTION
More AP Setup
#
This is the index number of each SSID profile.
Status
This shows whether the SSID profile is active (a yellow bulb) or not (a gray bulb).
SSID
An SSID profile is the set of parameters relating to one of the EMG6765-Q10A’s BSSs. The SSID
(Service Set IDentifier) identifies the Service Set with which a wireless device is associated.
(Service Set IDentifier) identifies the Service Set with which a wireless device is associated.
This field displays the name of the wireless profile on the network. When a wireless client scans
for an AP to associate with, this is the name that is broadcast and seen in the wireless client
utility.
for an AP to associate with, this is the name that is broadcast and seen in the wireless client
utility.
Security
This field indicates the security mode of the SSID profile.
Edit
Click the Edit icon to configure the SSID profile.