ZyXEL Communications Corporation EMG6765-Q10A Manuel D’Utilisation

Chapter 10 LAN

EMG6765-Q10A User’s Guide

Use this screen to enable IGMP Snooping and configure IGMP mode. Click Network > LAN > IGMP 
Snooping.

Figure 52   Network > LAN > IGMP Snooping

The following table describes the labels on this screen.

Autoconfiguration 
Type

Select SLAAC + RDNSS to enable IPv6 stateless auto-configuration on this interface. The 
interface will generate an IPv6 IP address itself from a prefix obtained from an IPv6 router in 
the network.

Select SLAAC + Stateless DHCPv6 to enable IPv6 stateless auto-configuration on this 
interface. The interface will get an IPv6 address from an IPv6 router and the DHCP server. The 
IP address information gets through DHCPv6.

Select Stateful DHCPv6 to allow a DHCP server to assign and pass IPv6 network addresses, 
prefixes and other configuration information to DHCP clients.

Static IP Address

Select this option to manually enter an IPv6 address if you want to use a static IP address.

LAN IPv6 

Address

Enter the LAN IPv6 address you want to assign to your EMG6765-Q10A in hexadecimal 
notation.

LAN IPv6 Prefix 

Length (48~64)

Enter the 48 to 64 address prefix length to specify in an IPv6 address compose the network 
address.

Prefix Preferred 

Lifetime

Enter the preferred lifetime for the prefix.

Prefix Valid 

Lifetime

 Enter the valid lifetime for the prefix.

Link Local Only

Select this option to only use the link local address on the EMG6765-Q10A interfaces in the LAN.

ULA

Select this option to identify a unique local address of the EMG6765-Q10A in the LAN.  

Apply

Click Apply to save your changes with the EMG6765-Q10A.

Cancel

Click Cancel to begin configuring this screen afresh.

Table 37   Network > LAN > IPv6 LAN  (continued)

Table 38   Network > LAN > IGMP Snooping 

IGMP Snooping