ZyXEL Communications Corporation FR1000Z Manuel D’Utilisation

Look at the LEDs (lights) on the top panel of the FR1000Z.

•  The POWER light blinks during start-up and is green once the 

FR1000Z is ready.

•  The WAN light is green if the Internet connection exists and blinks 

when transmitting data. 

•  The INTERNET light is green when Internet access is available.

•  The ETHERNET light turns on if the ETHERNET port is properly 

connected. The light blinks when the FR1000Z is sending or 
receiving data through the ETHERNET port.

•  The WIFI light turns on when the wireless network is enabled.



If none of the LEDs (lights) are on, check your connections. 
Make sure that you have the power adaptor connected to the 
FR1000Z and plugged in to an appropriate power source. 
Make sure the power source is turned on. Turn the FR1000Z 
off, wait for a few seconds and turn it back on. If the LEDs 
are still off, contact your local vendor.