ZyXEL Communications Corporation G-220F Manuel D’Utilisation

ZyXEL G-220F User’s Guide

Chapter 3 Wireless Station Mode Configuration

38

When you configure the ZyXEL G-220F to connect to a network with wireless security 
activated and the security settings are disabled on the ZyXEL G-220F, the screen varies 
according to the encryption method used by the selected network.

Figure 16   Station Mode: Security Settings: WEP  

The following table describes the labels in this screen.  

Table 6   Station Mode: Security Settings: WEP 

Security Settings

WEP

Select 64 Bits, 128 Bits or 256 Bits to activate WEP encryption and then fill in the 

related fields.
Select Disable to deactivate WEP encryption.

Authentication

Select an authentication method. Choices are Auto, Shared Key and Open 

System. Refer to 

for more information.

Pass Phrase

When you select the radio button, enter a passphrase of up to 63 case-sensitive 

printable characters. As you enter the passphrase, the ZyXEL G-220F 

automatically generates four different WEP keys and displays it in the key field 

below. Refer to Section 2.2.1 on page 27 for more information.
At the time of writing, you cannot use passphrase to generate 256-bit WEP keys.

Transmit Key

Select a default WEP key to use for data encryption. The key displays in the field 

below.