ZyXEL Communications Corporation G210H Manuel D’Utilisation
ZyXEL G-210H User’s Guide
36
Chapter 4 Wireless Station Mode Configuration
4.3.1 Security Settings
When you configure the G-210H to connect to a network with wireless security activated and
the security settings are disabled on the G-210H, the screen varies according to the encryption
method used by the selected network.
the security settings are disabled on the G-210H, the screen varies according to the encryption
method used by the selected network.
4.3.1.1 WEP Encryption
Figure 18 Station Mode: Security Setting: WEP
The following table describes the labels in this screen.
Channel
This field displays the channel number used by each wireless device.
Signal
This field displays the signal strength of each wireless device.
Scan
Click Scan to search for available wireless devices within transmission range.
Connect
Click Connect to associate to the selected wireless device.
Add
Click Add to create a new profile.
Network Type
This field displays the network type (Infrastructure or Ad Hoc) of the wireless
device.
Channel
This field displays the channel number used by each wireless device.
Security
This field shows whether data encryption is activated (WEP (WEP or 802.1x),
WPA, WPA-PSK, WPA2, WPA2-PSK) or inactive (DISABLE).
MAC address
This field displays the MAC address of the wireless device.
Table 4 Station Mode: Site Survey (continued)
LABEL
DESCRIPTION
Table 5 Station Mode: Security Setting: WEP
LABEL
DESCRIPTION
Security Settings
Authentication
Select an authentication method. Choices are AES or TKIP, please choose
according to the type selected on the Access Point.
Transmit Key
Select a default WEP key to use for data encryption. The key displays in the field
below.