ZyXEL Communications Corporation G210H Manuel D’Utilisation

ZyXEL G-210H User’s Guide

Chapter 4 Wireless Station Mode Configuration

41

A profile is a set of wireless parameters that you need to connect to a wireless network. With a 
profile activated, each time you start the G-210H, it automatically scans for the specific SSID 
and joins that network with the pre-defined wireless security settings. If the specified network 
is not available, the G-210H cannot connect to a network.

If you do not configure and activate a profile, each time you start the G-210H, the G-210H 
uses the default profile to connect to any available network that has no security enabled. 

The default profile is a profile that allows you to connect to any SSID that has no security 
enabled. 

Click the Profile tab in the ZyXEL utility program to display the Profile screen as shown next.

The profile function allows you to save the wireless network settings in this screen, or use one 
of the pre-configured network profiles.

PEAP Inner EAP

This field is only available when you select PEAP in the Authentication Type field.
The PEAP method used by the RADIUS server or AP for client authentication is 

MS CHAP v2.

Validate Server 

Certificate

Check this box to open up the rest of the Certificate selection menu.

Certificate Issuer 

Must Be

From the drop down menu, please select the appropriate certificate issuer or if you 

are uncertain, then select Any Trusted CA

Server Name Must 

Be

You must specify the name of the server that the certificate is connecting to.  

Please type in the server name and then select the appropriate bullet below when 

finished typing the name in.  

Back

Click Back to go to the Site Survey screen to select and connect to another 

network.

Save

Click Save to confirm your selections and advance to the next screen. Refer to 

Section 4.3.2 on page 47

. 

Exit

Click Exit to return to the Site Survey screen without saving.

Table 8   Station Mode: Security Settings: IEEE 802.1x