ZyXEL Communications Corporation G220V2 Manuel D’Utilisation

ZyXEL G-220 v2 User’s Guide

38

Chapter 3 Wireless Station Mode Configuration

The following table describes the labels in this screen. 

Follow the steps below to connect to a WLAN network using the Site Survey screen.

1 Click Scan to search for all available wireless networks within range.

2 To join a network, click an entry in the table to select a wireless network and then click 

Connect or double-click an entry. 

3 If the wireless security is activated for the selected wireless network, the Security 

Setting screen displays. You must set the related fields in the Security Setting screen to 
the same security settings as the associated wireless device. Refer to 

for more information.

Otherwise click the Exit button and connect to another wireless network without data 
encryption.

4 Verify that you have successfully connected to the selected network and check the 

network information in the Link Info screen.

Table 5   Station Mode: Site Survey 

Available Network 

List

Click a column heading to sort the entries.

,

,

 or

denotes that the wireless device is in infrastructure mode and the wireless 

security is activated.
denotes that the wireless device is in infrastructure mode but the wireless 

security is deactivated.

denotes that the wireless device is in Ad-Hoc mode and the wireless 

security is activated.

denotes that the wireless device is in Ad-Hoc mode but the wireless 

security is deactivated.

SSID

This field displays the SSID (Service Set IDentifier) of each wireless device.

Channel

This field displays the channel number used by each wireless device.

Signal

This field displays the signal strength of each wireless device.

Scan

Click Scan to search for available wireless devices within transmission range.

Connect

Click Connect to associate to the selected wireless device.

Site Info

Click an entry in the Available Network List table to display the information of the 

selected wireless device.

Network Type 

This field displays the network type (Infrastructure or Ad Hoc) of the wireless 

device.

Channel

This field displays the channel number used by each wireless device.

Encryption

This field shows whether data encryption is activated (WEP (WEP or 802.1x), 

WPA, WPA-PSK, WPA2, WPA2-PSK) or inactive (Disabled).

MAC address 

This field displays the MAC address of the wireless device.

Surveyed at 

This field displays the time when the wireless device is scanned.