ZyXEL Communications Corporation G220V2 Manuel D’Utilisation

ZyXEL G-220 v2 User’s Guide

42

Chapter 3 Wireless Station Mode Configuration

Configure IEEE 802.1x security with various authentication methods in this screen. 

Figure 19   Station Mode: Security Settings: 802.1x

The following table describes the labels in this screen.  

Password

This field is not available when you select TLS in the Authentication Type field. 
Enter the password associated with the user name above. 

Certificate

This field is only available when you select TLS in the Authentication Type field. 
Select a certificate from the drop-down list box.

Note: You must first have a wired connection to a network and 

obtain the certificate(s) from a certificate authority (CA). 
Consult your network administrator for more information.

Validate Server 

Certificate

Select the check box to check the certificate of the authentication server.

PEAP Inner EAP

This field is only available when you select PEAP in the Authentication Type 

field.
The PEAP protocol is MS CHAP v2.

Back

Click Back to go to the Site Survey screen to select and connect to another 

network.

Next

Click Next to confirm your selections and advance to the Confirm Save screen. 

Refer to 

. 

Exit

Click Exit to return to the Site Survey screen without saving.

Table 8   Station Mode: Security Settings: WPA/WPA2

Table 9   Station Mode: Security Settings: 802.1x

Authentication 

Type

Select an authentication method from the drop down list. Options are TLS and 

PEAP.

Login Name

Enter a user name. 
This is the user name that you or an administrator set up on a RADIUS server.