ZyXEL Communications Corporation IX253P Manuel D’Utilisation
Chapter 10 The Service Configuration Screens
Users Guide
106
The following table describes the labels in this screen.
Table 36 VOICE > Service Configuration > SIP Setting
LABEL
DESCRIPTION
SIP Account
Select the SIP account you want to see in this screen. If you change this
field, the screen automatically refreshes.
field, the screen automatically refreshes.
SIP Settings
Active SIP
Account
Active SIP
Account
Select this if you want the WiMAX Modem to use this account. Clear it if
you do not want the WiMAX Modem to use this account.
you do not want the WiMAX Modem to use this account.
Number
Enter your SIP number. In the full SIP URI, this is the part before the @
symbol. You can use up to 127 printable ASCII characters.
SIP Local
Port
Enter the WiMAX Modem’s listening port number, if your VoIP service
provider gave you one. Otherwise, keep the default value.
provider gave you one. Otherwise, keep the default value.
SIP Server
Address
Enter the IP address or domain name of the SIP server provided by
your VoIP service provider. You can use up to 95 printable ASCII
characters. It does not matter whether the SIP server is a proxy,
redirect or register server.
characters. It does not matter whether the SIP server is a proxy,
redirect or register server.
SIP Server
Port
Enter the SIP server’s listening port number, if your VoIP service
provider gave you one. Otherwise, keep the default value.
provider gave you one. Otherwise, keep the default value.
REGISTER
Server
Address
Enter the IP address or domain name of the SIP register server, if your
VoIP service provider gave you one. Otherwise, enter the same address
you entered in the SIP Server Address field. You can use up to 95
printable ASCII characters.
VoIP service provider gave you one. Otherwise, enter the same address
you entered in the SIP Server Address field. You can use up to 95
printable ASCII characters.
REGISTER
Server Port
Enter the SIP register server’s listening port number, if your VoIP
service provider gave you one. Otherwise, enter the same port number
you entered in the SIP Server Port field.
service provider gave you one. Otherwise, enter the same port number
you entered in the SIP Server Port field.
SIP Service
Domain
Enter the SIP service domain name. In the full SIP URI, this is the part
after the @ symbol. You can use up to 127 printable ASCII Extended
set characters.
after the @ symbol. You can use up to 127 printable ASCII Extended
set characters.
Send Caller ID
Select this if you want to send identification when you make VoIP phone
calls. Clear this if you do not want to send identification.
calls. Clear this if you do not want to send identification.
Authentication
User Name
User Name
Enter the user name for registering this SIP account, exactly as it was
given to you. You can use up to 95 printable ASCII characters.
Password
Enter the user name for registering this SIP account, exactly as it was
given to you. You can use up to 95 printable ASCII Extended set
characters.
given to you. You can use up to 95 printable ASCII Extended set
characters.
Apply
Click to save your changes.
Reset
Click to restore your previously saved settings.
Advanced Setup Click this to edit the advanced settings for this SIP account. The
Advanced SIP Settings screen appears.