ZyXEL Communications Corporation IX253P Manuel D’Utilisation
Chapter 16 The Remote Management Screens
Users Guide
177
16.5.2 SNMP Options
Click TOOLS > Remote Management > SNMP to access this screen. Use SNMP
options to control SNMP access to your WiMAX Modem.
options to control SNMP access to your WiMAX Modem.
Figure 80 TOOLS > Remote Management > SNMP
The following table describes the labels in this screen.
Table 68 TOOLS > Remote Management > SNMP
LABEL
DESCRIPTION
SNMP Configuration
Get Community
Get Community
Enter the Get Community, which is the password for the incoming
Get and GetNext requests from the management station. The default
is public and allows all requests.
Get and GetNext requests from the management station. The default
is public and allows all requests.
Set Community
Enter the Set community, which is the password for incoming Set
requests from the management station. The default is public and
allows all requests.
allows all requests.
Trap Community
Enter the trap community, which is the password sent with each trap
to the SNMP manager. The default is public and allows all requests.
to the SNMP manager. The default is public and allows all requests.
Trap Destination
Enter the IP address of the station to send your SNMP traps to.
SNMP
Port
Port
You may change the server port number for a service if needed,
however you must use the same port number in order to use that
service for remote management.
however you must use the same port number in order to use that
service for remote management.
Access Status
Select the interface(s) through which a computer may access the
WiMAX Modem using this service.