ZyXEL Communications Corporation IX253P Manuel D’Utilisation
Chapter 3 Internet Connection Wizard
Users Guide
42
3.1.2 System Information
This Internet Connection Wizard screen allows you to configure your WiMAX
Modem’s system information. The settings here correspond to the ADVANCED >
System Configuration > General screen (see
Modem’s system information. The settings here correspond to the ADVANCED >
System Configuration > General screen (see
Section 9.2 on page 95
for more).
Figure 7 Internet Connection Wizard > System Information
The following table describes the labels in this screen.
Table 5 Internet Connection Wizard > System Information
LABEL
DESCRIPTION
System
Name
Name
System Name is a unique name to identify the WiMAX Modem in an
Ethernet network. Enter a descriptive name. This name can be up to 30
alphanumeric characters long. Spaces are not allowed, but dashes "-" and
underscores "_" are accepted.
Ethernet network. Enter a descriptive name. This name can be up to 30
alphanumeric characters long. Spaces are not allowed, but dashes "-" and
underscores "_" are accepted.
Domain
Name
Name
Type the domain name (if you know it) here. If you leave this field blank,
the ISP may assign a domain name via DHCP. The domain name entered
the ISP may assign a domain name via DHCP. The domain name entered
by you is given priority over the ISP assigned domain name.
Back
Click to display the previous screen.
Next
Click to proceed to the next screen.
Exit
Click to close the wizard without saving.