ZyXEL Communications Corporation NBG2105 Manuel D’Utilisation

Chapter 13 Wireless LAN

NBG2105 User’s Guide

The following table describes the labels in this screen.

Your NBG2105 allows you to configure up to four 64-bit or 128-bit WEP keys but only one key can 
be enabled at any one time.

Select WEP from the Encryption list.

Wireless LAN > Security: WEP 

The following table describes the labels in this screen.

Wireless LAN > Security: Disabled

Encryption

Select Disabled to allow any client to associate this network without authentication.

Apply Changes

Click this to save changes back to the NBG2105.

Reset

Click this to begin configuring this screen afresh.

Wireless LAN > Security: WEP

Encryption

Select WEP to allow clients to associate this network with WEP authentication.

Key Length

Select 64-bit or 128-bit.

This dictates the length of the security key that the network is going to use.

Key Format

Select Hex to enter hexadecimal characters as a WEP key. 

Select ASCII to enter ASCII characters as WEP key. 

Encryption Key

The WEP keys are used to encrypt data. Both the NBG2105 and the wireless stations 
must use the same WEP key for data transmission.

If you chose 64-bit in the Key Format field, then enter any 5 ASCII characters or 10 
hexadecimal characters ("0-9", "A-F").

If you chose 128-bit in the Key Format field, then enter 13 ASCII characters or 26 
hexadecimal characters ("0-9", "A-F"). 

Show Password

Select this to show the encryption key on the screen.