ZyXEL Communications Corporation NBG416N Manuel D’Utilisation

Chapter 3 The Web Configurator

NBG-416N User’s Guide

Use the sub-menus on the navigation panel to configure NBG-416N features. 

The following table describes the sub-menus.

System Setting
- Firewall

This shows whether the firewall is active or not.

- UPnP

This shows whether UPnP is active or not.

Interface Status

Interface

This displays the NBG-416N port types. The port types are: WAN, LAN 
and WLAN.

Status

For the LAN and WAN ports, this field displays Down (line is down) or Up 
(line is up or connected).

For the WLAN, it displays Up when the WLAN is enabled or Down when 
the WLAN is disabled.

Rate

For the LAN ports, this displays the port speed and duplex setting or N/A 
when the line is disconnected.

For the WAN port, it displays the port speed and duplex setting if you’re 
using Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to 
trigger a call) and Drop (dropping a call) if you're using PPPoE or PPTP 
encapsulation. This field displays N/A when the line is disconnected.

For the WLAN, it displays the maximum transmission rate when the WLAN 
is enabled and N/A when the WLAN is disabled.

Summary

DHCP Table

Use this screen to view current DHCP client information.

Packet Statistics

Use this screen to view port status and packet specific statistics.

WLAN Station Status

Use this screen to view the wireless stations that are currently associated 
to the NBG-416N.

Table 3   Web Configurator Status Screen (Router Mode) (continued) 

Table 4   Screens Summary

Status

This screen shows the NBG-416N’s general device, system 
and interface status information. Use this screen to access 
the wizard, and summary statistics tables.

Network