ZyXEL Communications Corporation NBG416N Manuel D’Utilisation

 Chapter 3 The Web Configurator

NBG-416N User’s Guide

Click the Packet Statistics (Details...) hyperlink in the Status screen. Read-
only information here includes port status, packet specific statistics and the 
"system up time". The Poll Interval(s) field is configurable and is used for 
refreshing the screen.

Figure 8   Summary: Packet Statistics 

The following table describes the labels in this screen.

MAC Address This field shows the MAC address of the computer with the name in the 

Host Name field.

Every Ethernet device has a unique MAC (Media Access Control) address 
which uniquely identifies a device. The MAC address is assigned at the 
factory and consists of six pairs of hexadecimal characters, for example, 
00:A0:C5:00:00:02.

Refresh

Click Refresh to renew the screen. 

Table 5   Summary: DHCP Table (continued)

Table 6   Summary: Packet Statistics

Port

This is the NBG-416N’s port type.

Status 

For the LAN ports, this displays the port speed and duplex setting or 
Down when the line is disconnected.

For the WAN port, it displays the port speed and duplex setting if 
you’re using Ethernet encapsulation and Idle (line (ppp) idle), Dial 
(starting to trigger a call) and Drop (dropping a call) if you're using 
PPPoE or PPTP encapsulation. This field displays Down when the line 
is disconnected.

For the WLAN, it displays the maximum transmission rate when the 
WLAN is enabled and Down when the WLAN is disabled.

TxPkts 

This is the number of transmitted packets on this port.

RxPkts 

This is the number of received packets on this port.

Collisions 

This is the number of collisions on this port.