ZyXEL Communications Corporation NBG416N Manuel D’Utilisation

Chapter 4 Connection Wizard

NBG-416N User’s Guide

Set up your wireless LAN using the following screen.

Figure 14   Wizard Step 2: Wireless LAN

The following table describes the labels in this screen.

Table 9   Wizard Step 2: Wireless LAN

Name 
(SSID)

Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the 
wireless LAN. 

If you change this field on the NBG-416N, make sure all wireless stations 
use the same SSID in order to access the network. 

Security

Select a Security level from the drop-down list box.

Choose Auto (WPA2-PSK) to have the NBG-416N generate a pre-shared 
key automatically. After you click Next a screen pops up displaying the 
generated pre-shared key. Write down the key for use later when 
connecting other wireless devices to your network. Click OK to continue. 

Choose None to have no wireless LAN security configured. If you do not 
enable any wireless security on your NBG-416N, your network is accessible 
to any wireless networking device that is within range. If you choose this 
option, skip directly to 

.

Choose Extend (WPA-PSK or WPA2-PSK) security to configure a Pre-
Shared Key. Choose this option only if your wireless clients support WPA-
PSK or WPA2-PSK respectively. If you choose this option, skip directly to 

Channel 
Selection

The range of radio frequencies used by IEEE 802.11b/g/n wireless devices 
is called a channel. The device will automatically select the channel with 
the least interference.

Back

Click Back to display the previous screen.

Next

Click Next to proceed to the next screen. 

Exit

Click Exit to close the wizard screen without saving.