ZyXEL Communications Corporation NBG416N Manuel D’Utilisation
Chapter 4 Connection Wizard
NBG-416N User’s Guide
42
4.4.3 PPTP Connection
Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables
transfers of data from a remote client to a private server, creating a Virtual Private
Network (VPN) using TCP/IP-based networks.
transfers of data from a remote client to a private server, creating a Virtual Private
Network (VPN) using TCP/IP-based networks.
PPTP supports on-demand, multi-protocol, and virtual private networking over
public networks, such as the Internet.
public networks, such as the Internet.
Refer to the appendix for more information on PPTP.
Note: The NBG-416N supports one PPTP server connection at any given time.
Figure 19 Wizard Step 3: PPTP Connection
The following table describes the fields in this screen
Table 13 Wizard Step 3: PPTP Connection
LABEL
DESCRIPTION
ISP Parameters for Internet Access
Connection Type Select PPTP from the drop-down list box. To configure a PPTP client,
Connection Type Select PPTP from the drop-down list box. To configure a PPTP client,
you must configure the User Name and Password fields for a PPP
connection and the PPTP parameters for a PPTP connection.
connection and the PPTP parameters for a PPTP connection.
User Name
Type the user name given to you by your ISP.
Password
Type the password associated with the User Name above.
PPTP Configuration
Server IP
Address
Server IP
Address
Type the IP address of the PPTP server.