ZyXEL Communications Corporation NBG418N Manuel D’Utilisation

Chapter 13 Remote Management

NBG-418N User’s Guide

Remote management over LAN or WAN will not work when:

You have disabled that service in one of the remote management screens.

The IP address in the Secured Client WAN IP Address field does not match the client IP address. 
If it does not match, the NBG-418N will disconnect the session immediately.

There is already another remote management session with an equal or higher priority running. You 
may only have one remote management session running at one time.

There is a firewall rule that blocks it.

When NAT is enabled:

• Use the NBG-418N’s WAN IP address when configuring from the WAN. 
• Use the NBG-418N’s LAN IP address when configuring from the LAN.

There is a default system management idle timeout of five minutes (three hundred seconds). The 
NBG-418N automatically logs you out if the management session remains idle for longer than this 
timeout period. The management session does not time out when a statistics screen is polling. You 
can change the timeout period in the System screen.

To change your NBG-418N’s World Wide Web settings, click Management > Remote MGMT to 
display the WWW screen.

Management > Remote MGMT > WWW