ZyXEL Communications Corporation NBG419N Manuel D’Utilisation

Page de 298
Chapter 11 Wireless LAN
NBG-419N User’s Guide
108
11.4.3  WPA-PSK/WPA2-PSK
Click Network > Wireless LAN to display the General screen. Select WPA-PSK 
or WPA2-PSK from the Security Mode list.
Figure 70   Network > Wireless LAN > General: WPA-PSK/WPA2-PSK
The following table describes the labels in this screen.
Refer to 
Table 36 on page 103
 for descriptions of the other labels in this screen.
Table 39   Network > Wireless LAN > General: WPA-PSK/WPA2-PSK
LABEL
DESCRIPTION
Security Mode
Select WPA-PSK or WPA2-PSK to enable data encryption.
WPA-PSK 
Compatible
This field appears when you choose WPA-PSK2 as the Security Mode.
Check this field to allow wireless devices using WPA-PSK security 
mode to connect to your NBG-419N.
Pre-Shared Key  WPA-PSK/WPA2-PSK uses a simple common password for 
authentication.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
Group Key 
Update Timer
The Group Key Update Timer is the rate at which the AP  sends a new 
group key out to all clients. 
The default is 3600 seconds (60 minutes).
Apply
Click Apply to save your changes back to the NBG-419N.
Reset
Click Reset to reload the previous configuration for this screen.
om
pan
on
fiden
tial