ZyXEL Communications Corporation NBG419N Manuel D’Utilisation
Chapter 11 Wireless LAN
NBG-419N Users Guide
113
11.9 WPS Station Screen
Use this screen when you want to add a wireless station using WPS. To open this
screen, click Network > Wireless LAN > WPS Station tab.
screen, click Network > Wireless LAN > WPS Station tab.
Note: Note: After you click Push Button on this screen, you have to press a similar
button in the wireless station utility within 2 minutes. To add the second wireless
station, you have to press these buttons on both device and the wireless station
again after the first 2 minutes.
Figure 75 Network > Wireless LAN > WPS Station
Status
This displays Configured when the NBG-419N has connected to a
wireless network using WPS or when Enable WPS is selected and
wireless network using WPS or when Enable WPS is selected and
wireless or wireless security settings have been changed. The current
wireless and wireless security settings also appear in the screen.
wireless and wireless security settings also appear in the screen.
This displays Unconfigured if WPS is disabled and there are no
wireless or wireless security changes on the NBG-419N or you click
wireless or wireless security changes on the NBG-419N or you click
Release_Configuration to remove the configured wireless and
wireless security settings.
wireless security settings.
Release
Configuration
Configuration
This button is only available when the WPS status displays Configured.
Click this button to remove all configured wireless and wireless security
settings for WPS connections on the NBG-419N.
802.11 Mode
This is the 802.11 mode used. Only compliant WLAN devices can
associate with the NBG-419N.
associate with the NBG-419N.
SSID
This is the name of the wireless network.
Security
This is the type of wireless security employed by the network.
Apply
Click Apply to save your changes back to the NBG-419N.
Refresh
Click Refresh to get this screen information afresh.
Table 43 Network > Wireless LAN > WPS
LABEL
DESCRIPTION
om
pan
y
on
fiden
tial