ZyXEL Communications Corporation NBG419N Manuel D’Utilisation
NBG-419N Users Guide
63
C
HAPTER
7
Router Mode
7.1 Overview
The NBG-419N is set to router mode by default. Routers are used to connect the
local network to another network (for example, the Internet). In the figure below,
the NBG-419N connects the local network (LAN1 ~ LAN4) to the Internet.
local network to another network (for example, the Internet). In the figure below,
the NBG-419N connects the local network (LAN1 ~ LAN4) to the Internet.
Figure 39 NBG-419N Network
Note: The Status screen is shown after changing to the Expert mode of the Web
Configurator. It varies depending on the device mode of your NBG-419N.
7.2 What You Can Do
Use the Status screen (
Section 7.3 on page 64
) to view read-only information
about your NBG-419N.
Modem
om
pan
y
on
fiden
tial