ZyXEL Communications Corporation NBG419N Manuel D’Utilisation
Chapter 9 WISP Mode
NBG-419N Users Guide
84
9.5 Wireless LAN General Screen
Use this screen to configure the wireless LAN settings of your NBG-419N. Go to
Configuration > Wireless LAN > General to open the following screen.
Configuration > Wireless LAN > General to open the following screen.
Figure 52 WISP Mode: LAN > General Screen
The following table describes the labels in this screen.
9.5.0.1 No Security
Use this screen if the access point to which you want to connect does not use
encryption.
encryption.
Figure 53 No Security (WISP)
Table 30 WISP Mode: LAN > General Screen
LABEL
DESCRIPTION
Wireless Setup
Network
Name
(SSID)
Network
Name
(SSID)
Enter the name of the access point to which you are connecting.
Security
Security
Mode
Security
Mode
Select the security mode of the access point to which you want to connect.
Apply
Click Apply to save your changes back to the NBG-419N.
Reset
Click Reset to reload the previous configuration for this screen.
om
pan
y
on
fiden
tial