ZyXEL Communications Corporation NBG6503 Manuel D’Utilisation

 Chapter 10 Wireless LAN

NBG6503 User’s Guide

pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC 
address of the devices to configure this screen.

To change your Router’s MAC filter settings, click Network > Wireless LAN 2.4G or Wireless 
LAN 5G > MAC Filter. The screen appears as shown.

Network > Wireless LAN 2.4G/5G > MAC Filter

The following table describes the labels in this menu.

Use this screen to allow wireless advanced features, such as intra-BSS networking and set the  
RTS/CTS Threshold

Network > Wireless LAN 2.4G/5G > MAC Filter

Access Policy

Policy 

Define the filter action for the list of MAC addresses in the MAC Address table. 

Select Allow to permit access to the Router, MAC addresses not listed will be denied 
access to the Router. 

Select Reject to block access to the Router, MAC addresses not listed will be allowed to 
access the Router 

Add a station 
Mac Address

Enter the MAC addresses of the wireless station that are allowed or denied access to the 
Router in these address fields. Enter the MAC addresses in a valid MAC address format, 
that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc. Click Add.

MAC Filter Summary

Delete

Click the delete icon to remove the MAC address from the list.

MAC Address

This is the MAC address of the wireless station that are allowed or denied access to the 
Router.

Apply

Click Apply to save your changes back to the Router.

Cancel

Click Cancel to reload the previous configuration for this screen.