ZyXEL Communications Corporation NBG6616 Manuel D’Utilisation

Chapter 11 Wireless LAN

NBG6616 User’s Guide

The MAC filter screen allows you to configure the NBG6616 to give exclusive access to devices 
(Allow) or exclude devices from accessing the NBG6616 (Deny). Every Ethernet device has a 
unique MAC (Media Access Control) address. The MAC address is assigned at the factory and 
consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know 
the MAC address of the devices to configure this screen.

To change your NBG6616’s MAC filter settings, click Network > Wireless LAN 2.4G/5G > MAC 
Filter. The screen appears as shown.

Enable 

Bandwidth 

Management 

for Guest 

WLAN 

Select this to turn on bandwidth management for the Guest WLAN network.

Maximum 

Bandwidth 

Enter a number to specify maximum bandwidth the Guest WLAN network can use.

Security Mode

Select Static WEP, WPA-PSK, WPA, WPA2-PSK or WPA2 to add security on this 
wireless network. The wireless clients which want to associate to this network must have 
same wireless security settings as this device. After you select to use a security, additional 
options appears in this screen. See 

 for detailed information on 

different security modes. Or you can select No Security to allow any client to associate 
this network without authentication.

Note: If the WPS function is enabled (default), only No Security and WPA2-PSK are 

available in this field.

Apply

Click Apply to save your changes back to the NBG6616.

Cancel

Click Cancel to reload the previous configuration for this screen.

Network > Wireless LAN 2.4G/5G > More AP: Edit (continued)