ZyXEL Communications Corporation NBG6616 Manuel D’Utilisation
Chapter 23 Universal Plug-and-Play (UPnP)
NBG6616 User’s Guide
159
All UPnP-enabled devices may communicate freely with each other without additional configuration.
Disable UPnP if this is not your intention.
Disable UPnP if this is not your intention.
23.3 UPnP Screen
Use this screen to enable UPnP on your NBG6616.
Click Management > UPnP to display the screen shown next.
Figure 103
Management > UPnP
The following table describes the fields in this screen.
23.4 Technical Reference
The sections show examples of using UPnP.
23.4.1 Using UPnP in Windows XP Example
This section shows you how to use the UPnP feature in Windows XP. You must already have UPnP
installed in Windows XP and UPnP activated on the NBG6616.
installed in Windows XP and UPnP activated on the NBG6616.
Make sure the computer is connected to a LAN port of the NBG6616. Turn on your computer and
the NBG6616.
the NBG6616.
23.4.1.1 Auto-discover Your UPnP-enabled Network Device
1
Click start and Control Panel. Double-click Network Connections. An icon displays under
Internet Gateway.
Internet Gateway.
2
Right-click the icon and select Properties.
Table 72
Management > UPnP
LABEL
DESCRIPTION
UPnP
Select Enable to activate UPnP. Be aware that anyone could use a UPnP application to
open the web configurator's login screen without entering the NBG6616's IP address
(although you must still enter the password to access the web configurator).
open the web configurator's login screen without entering the NBG6616's IP address
(although you must still enter the password to access the web configurator).
Apply
Click Apply to save the setting to the NBG6616.
Cancel
Click Cancel to return to the previously saved settings.