ZyXEL Communications Corporation NBG6616 Manuel D’Utilisation

 Chapter 7 Access Point Mode

NBG6616 User’s Guide

Use the menu in the navigation panel to configure NBG6616 features in Access Point Mode.

Menu: Access Point Mode 

Refer to 

 for descriptions of the labels shown in the navigation panel.

Use this section to configure your LAN settings while in Access Point Mode. 

Click Network > LAN to see the screen below.

Note: If you change the IP address of the NBG6616 in the screen below, you will need to 

log into the NBG6616 again using the new IP address.

- Memory Usage

This shows what percentage of the heap memory the NBG6616 is using. 

Interface Status

Interface

This displays the NBG6616 port types. The port types are: LAN and WLAN.

Status

For the LAN ports, this field displays Down (line is down) or Up (line is up or connected).

For the 2.4GHz/5GHz WLAN, it displays Up when the 2.4GHz/5GHz WLAN is enabled or 
Down when the 2.4G/5G WLAN is disabled.

Rate

For the LAN ports, this displays the port speed and duplex setting or N/A when the line is 
disconnected.

For the 2.4GHz/5GHz WLAN, it displays the maximum transmission rate when the 2.4GHz/
5GHz WLAN is enabled and N/A when the WLAN is disabled.

Status Screen: Access Point Mode (continued)